Generally, doors don’t have more impact than windows, when we perceive them on the basis of the amount of energy consumption. Things can be different if you compare windows with patio or garden doors. Such doors come in a variety of materials and can be more energy efficient. They can reduce heat flow better than other door types. If you see them on the basis of style and insulation material, you will find  metal-clad doors more efficient than the doors made of solid wood. Hence, Canadians prefer to have energy efficient doors that don’t lose energy. Some people claim that their doors are made of the best quality material, but their doors lose even more energy and make the home airy and uncomfortable. And all it happens due to ill-fitting doors.

How to reduce heat loss?

Heat may be lost through the door, frame, sill, glass and other rough openings. A careful choice of the door can reduce the amount of heat loss. The location, proper installation and maintenance of door is also a factor that may result in heat loss if not handled properly. It is easy to reduce heat loss simply by:

  • Placing a door out of the path of dominating winds.
  • Locating the door on the leeward side of a house.
  • Providing windbreaks.
  • Using an airlock vestibule.

Storm DoorIt will be highly beneficial if you can have properly designed and installed storm doors because these doors not only protect the home from weather extremes but also provide some degree of improved energy efficiency. A storm door is a sort of door type that you can install ahead of an exterior access door in order to allow ventilation and protect it from the  bad weather. This type of doors is typically made from different materials such as wood, aluminium, plastics, PVC, fiberglass, etc. Full-View, Retractable Screen, and Ventilating are three basic types of storm doors that you can avail from the market. If you can insert screen with storm doors, these doors will offer better ventilation in the summer.

Sliding glass patio doors – A popular choice in Canada

Peeping out through a door and enjoying a natural view standing inside your house adds more freshness and relaxation to your tired body and mind.  And can be made possible only when you have a patio or garden door that connects your garden to your house.

Sliding glass patio doors are widely popular in Canada and are covered by the CSA-A440.2 Energy Rating (ER) system and the CGSB 82.1 Standard. If you are going to purchase such doors, make sure you adhere to these standards. Your reliance on these standards indicate that you are going to have a high quality door that is energy-efficient and increase energy efficiency and comfort.

If you have a good-conditioned, existing patio door of good quality and you want it to make energy-efficient or reduce the amount of air leakage, then you replace the door gaskets, weather stripping and hardware. You can also shut the door with a removable sealant if they are not used in the winter. Such doors can also be covered with heat shrink plastic (on the interior side).

You should not continue with a poor-conditioned door. To get the best results doors should be replaced on time. Don’t forget new sliders always perform better than older models. So, don’t forget to change them before it is too late. Give preference to various aspects associated with the patio doors to have the maximum in energy efficiency. These include:

  • Well-insulated cores.
  • Wood, vinyl, fiberglass or thermally broken metal frames.
  • Weather stripping made from long lasting and high-performance materials.
  • Low air leakage rates.
  • Maintenance-free framing materials.
  • High-performance glazing.

To get a better experience and comfort with patio doors, you should seriously look at the factors that contribute to air leakage.  It will be highly beneficial for you if you can get rid of the air leakage factors such as worn weatherstripping, improperly located strike plates, unfit frames,  warped doors that no longer contact the stops, etc. To get rid of such problems or get all of them corrected, you need to have the services of a carpenter or any competent door garden doorand window service company. You should select good quality insulated doors made of foam and wood covered with metal. Doors should be compared for energy performance by their ER number.

Remember: A deteriorated door should be instantly replaced with a new one having an energy-efficient insulation.

If you are interested in having best energy efficient garden doors in Toronto or residential purpose modern doors in Toronto, then you need to check mentioned-below points in depth. These include:

  • Cores of materials to cultivate high insulating values.
  • Frames made of wood, vinyl, or thermally broken metals.
  • Weather-stripping fabricated from flexible and long lasting materials.
  • Low air leakage rates.
  • Framing materials that are maintenance free.
  • Higher Energy Rating (ER) for greater air space.